![]() |
|||
Simple to use, Free to go!
15 sec in hardware installation; 15 minutes experienced with software operation
|
|||
![]() |
![]() |
![]() |
|
| Hardware | |
| CPU | Samsung-S3C2440A 32bit 400MHz RISC Microprocessor |
| SDRAM | 64MB Samsung-K4S561632H x2 |
| Flash | 32MB Samsung-K9F5608U0D |
| Power supply | DC 4.6V~5.5V |
| Battery | Rechargeable 1100mAh Li-Ion Battery |
| Display | 3.5" TFT LCD with Touch-Panel, 65536 Colors, 320 x 240 Pixels |
| Speaker | Stereo 1.5W 8 £[ Speaker x2 |
| Earphone | 3.5mm Earphone Jack |
| Dimension | 12.73cm(W) x 9.54cm(H) x 4.1cm (T) |
| Weight | 232g |
| Button | One Power Button |
| USB port | One Port Mini USB |
| External Antenna Interface | MMCX Connector |
| Operating Temperature | -10¢XC to + 60¢XC |
| Storage Temperature | -40¢XC to + 85¢XC |
| Operation Humidity | 5%~95%, Non-Condensing |
| Software | |
| Operation System | Microsoft WinCE.Net 4.2 |
| Application Software | Integration Software |
| Map | Integrated map smart2go™ GIS / LBS provided by Tele Atlas |
| GPS Receiver | |
| Protocol | NMEA 0183 (Default¡GGGA,GSA,GSV,RMC,VTG) |
| Baud Rate | 9600,N,8,1(Default) |
| Datum | WGS84 |
| Channel | 20 Channel All-In-View Tracking |
| Frequency | L1, 1575.42MHz |
| Hot Start | 1 sec. Average |
| Warm Start | 37 sec. Average |
| Cold Start | 41 sec. Average |
| Reacquisition Time | 0.1 sec (Typical) |
| Position Accuracy | 10 meters, 2D RMS,7 meters 2D RMS, WAAS Corrected |
| Sensitivity | Tracking: -159 dBm |
| Antenna Type | Built-in Low Noise Amplifier |
| Car charger | Output DC5V | ![]() |
| Travel charger | Output DC5V EU/UK/US | ![]() |
| Standard Cradle | Standard Type | ![]() |
| Luxury Cradle | Luxury Type | ![]() |
| ARKON Cradle | Standard Arkon Type | ![]() |
| External Antenna | 2m/5m MMCX Type | ![]() |
| USB line | USB to Mini USB | ![]() |
| SD CARD | 256MB/512MB/1GB/2GB | ![]() |
| MANUAL | Operation manual Hardware/MAP | ![]() |
| CD | Operation manual / Active Sync Software for Data Transmission | ![]() |
| Front Plate | Green/Red/Brown/Silver for Customer Request | ![]() |